PTK-8243, ProTek RC "TruTorque" Metric 1/4" Power Drill Tip Set (4) (1.5, 2.0, 2.5, 3.0mm) This is a ProTek R/C "TruTorque" Metric Power Tool Tip Set, with 1.5, 2.0, 2.5 and 3.0mm tips. No one wants to spend money on low quality tools. Tools are an investment that should not be taken lightly and are one of the few items that should outlast the life of the model you are working on...and remain with you for years after. With so many choices available, the decision can be overwhelming. So ProTek R/C has stepped up again, expanding its product line with a complete range of affordable, high quality tools that help to make the decision a little easier. Anyone who has used a cordless drill to wrench on their rig knows that when used properly, power tools can provide an incredible advantage. They not only allow you to replace damaged parts faster, but also help to prevent hand fatigue. ProTek R/C "TruTorque" Power Tool Tips are machined from high quality HSS steel for durability and long life. The precision cut tips provide an exceptional fit with the fastener. The 1/4" drive hex ends are designed to fit tools that accept a 1/4" drive hex socket. When it comes to high quality products that are backed by incredible customer support, ProTek R/C has you covered with the products you need to keep your rig ready for action, no matter what. Features: Quality tool steel tips Standard 1/4" drive for compatibility with common power tools Size is marked on the tip for identification Specifications: Total Length: 85mm Tip Length: 54mm Material: HSS Steel Includes: (1) 1.5mm 1/4" Drive Power Tool Tip (1) 2.0mm 1/4" Drive Power Tool Tip (1) 2.5mm 1/4" Drive Power Tool Tip (1) 3.0mm 1/4" Drive Power Tool Tip This product was added to our catalog on December 16, 2021

Read more less

PTK-8485, ProTek RC Exactness High Grip Hobby Knife (#11 Blade) The ProTek RC Exactness High Grip Hobby Knife is a great option for cutting or trimming plastic, polycarbonate, rubber, paper and wood. The soft handle has a hex nut on the adjusting end to keep the handle from rolling away but still allowing for a comfortable round handle. Using number 11 blades, this hobby knife also features a blade cover for safe storage and transport. Package includes one hobby knife and one blade. Features: Sharp, Long lasting #11 blade Soft, no slip handle Non-roll design Replacement blades available (PTK-8487) This product was added to our catalog on September 30, 2022

Read more less

PTK-8279, ProTek RC "TruTorque" Lexan Scissors (Straight) This product was added to our catalog on December 16, 2021

Read more less

PTK-8487, ProTek RC Replacement #11 Hobby Knife Blades (10pcs) ProTek RC Replacement #11 Hobby Knife Blades. These replacement blades are intended for the ProTek RC Hobby Knife (PTK-8485), or for any hobby knife requiring a #11 blade. Package includes ten blades. This product was added to our catalog on September 30, 2022

Read more less

PTK-8203, ProTek RC "TruTorque" Lexan Body Reamer This product was added to our catalog on December 16, 2021

Read more less

PTK-8486, ProTek RC Sprue Side Cutter The ProTek RC Sprue Cutter is a great option for cutting plastic parts free, modifying tire pins and even thin gauge wire. Made from hardened stainless steel, these cutters feature comfortable grips with a heavy-duty return spring for better cutting control. Package includes one sprue cutter. Features: Precision cut blades with tapered edge Made from hardened stainless steel Comfortable soft grips Perfect for cutting parts and trimming tires This product was added to our catalog on September 30, 2022

Read more less

PTK-8416, ProTek RC "TruTorque SL" Metric Hex Driver Set (4) (1.5mm, 2.0mm, 2.5mm, 3.0mm) Features: CNC machined knurled aluminum handle with relief holes Rotating aluminum end cap Durable, precision cut, 80mm long HSS Steel tip Tip size is etched in three places on the handle for easy identification Includes: (1) 1.5mm Hex Driver (1) 2.0mm Hex Driver (1) 2.5mm Hex Driver (1) 3.0mm Hex Driver This product was added to our catalog on December 16, 2021

Read more less

PTK-8000, ProTek RC P-8 1/8 Buggy Super Hauler Bag (Plastic Inner Boxes) This is the ProTek R/C P-8 1/8 Scale Buggy Super Hauler Bag. The P-8 Super Hauler Bag has evolved, and now features a variety of improvements that make the P-8 a durable, high quality, easier to use piece of luggage. These improvements include plastic interior framing and additional velcro surfaces that secure the shelves on the sides and rear, to prevent the shelves from sagging and causing the drawers to hang up when they are being pulled out or slid into position. Protective zipper tabs have been added to the front cover to help protect the zippers during transportation, and a solid velcro strip has been added to the entire length of the lower portion of the front cover to help keep the cover secured. When the cover is rolled up there are now five velcro tabs (instead of three), that will help to prevent the cover from coming loose when its rolled up. Finally, the graphic on the front features the ProTek R/C checkered flag graphic, with a ProTek R/C logo on the rear flap. The ProTek R/C P-8 super hauler bag was designed from the ground up for 1/8th scale buggy racers. The bag has space on top under a covered flap for storing all your tools, a place on the back for your setup board and storage compartments on the side for storing your setup equipment or other tools. Inside the bag has three layers of drawers, with four split draws on the bottom (two each side by side above each other) and one large drawer on the top. These are the newer style Hauler Bags that have plastic inner boxes. The large drawer on the top is large enough to hold a 1/8th scale buggy with wing and wheels attached! In addition, it is also very easy to tow the bag around the track as it features a heavy duty retractable handle and smooth trolley wheels. Also included is a carrying strap that can be moved out of the way to access tools in the top compartment, or adjusted to provide easy carrying of the bag.  Specifications: Overall Bag Dimensions (WxHxD): 21.65x23.22x13.77" Large Drawer Dimensions (WxHxD): 19.5x7.5x12.5" Medium Drawer Dimensions (WxHxD): 9.5x4.5x12.5" Small Drawer Dimensions (WxHxD): 8.5x4.5x12.5" *Dimensions may vary slightly due to manufacturers tolerances. This product was added to our catalog on December 16, 2022

Read more less

PTK-2034, ProTek RC Aluminum Turnbuckle Wrench Set (3, 3.2, 3.5, 3.7, 4, 5, 5.5 & 6mm) This product was added to our catalog on December 16, 2021

Read more less

PTK-8266, ProTek RC "TruTorque" Spring Clip Remover This product was added to our catalog on December 16, 2021

Read more less

PTK-8282, ProTek RC "TruTorque SL" 4-Piece Metric Nut Driver Set (5.0, 5.5, 7.0, 8.0mm) This is the ProTek R/C "TruTorque SL" Metric Nut Driver Set. No one wants to spend money on low quality tools. Tools are an investment that should not be taken lightly and are one of the few items that should outlast the life of the model you are working on...and remain with you for years after. With so many choices available, the decision can be overwhelming. So ProTek R/C has stepped up again, expanding its product line with a complete range of affordable, high quality tools that help to make the decision a little easier. ProTek R/C "TruTorque SL" nut drivers feature updated, "super light" 20mm diameter machined aluminum handles that have been knurled to provide a high leverage, non slip surface that will be comfortable to use during long wrenching sessions. The tool size is etched into the handle for easy identification and a black rubber cap is fitted to the end to increase comfort during use. The precision cut tool steel tips provide an exceptional fit with the fastener, and feature a bronze colored finish that not only looks good, but also helps to protect the steel from corrosion. When it comes to high quality products that are backed by incredible customer support, ProTek R/C has you covered with the products you need to keep your rig ready for action, no matter what. Features: Updated SL super light CNC machined knurled aluminum handles Size is marked on the handle for identification 4-Piece nut driver set Rubber end caps Includes: (1) 5.0mm Metric Nut Driver (1) 5.5mm Metric Nut Driver (1) 7.0mm Metric Nut Driver (1) 8.0mm Metric Nut Driver This product was added to our catalog on December 16, 2021

Read more less